Epson BrightLink 455Wi+ Guía De Referencia Rápida página 46

■
Try pressing the
6. Launch the Easy Interactive Driver on your computer. You should see the
pen icon in the lower right corner of your screen (Windows
Dock (Mac OS
following:
■
Windows: select
Projector
■
Mac OS: open the
Driver
7. Calibrate your system (see page 13).
■
Windows: click the
(lower right corner of your screen), then select
■
Mac OS X: click the
the menu bar, then select
■
After you read the message about calibration,
click
OK
■
Use the interactive pen to touch each flashing green
circle as it appears. Continue until all the circles stop
flashing and turn black.
■
Hold the pen at an angle, and make sure you are not casting a shadow on
the pen.
■
If you make a mistake, press
calibration.
8. Launch Easy Interactive Tools (see page 17).
■
Windows: select
Projector
Mac OS X: open the
Tools
4
Introduction
Source Search
®
X). If you don't see the icon, see page 13 or do one of the
or
Start
>
Easy Interactive Driver
Applications
icon.
.
or
Start
>
Easy Interactive Tools
Applications
>
Easy Interactive Tools
button on the remote control.
>
All Programs
.
folder, then select the
pen icon in the system tray on your taskbar
pen icon in the Dock, select
Calibrate (Normal)
on your computer keyboard and restart
Esc
>
All Programs
.
folder, then select
.
®
) or in the
or >
Programs Epson
Easy Interactive
Calibrate (Normal)
Calibrate
.
or >
Programs Epson
Easy Interactive
.
from