Sharp MX-PB12 Guía De Instalación De Software página 37

MAC OS 9.0 - 9.2.2
If you are using Mac OS 9.0 to 9.2.2, make sure that "LaserWriter 8" has been installed and that
Note
the "LaserWriter 8" checkbox is selected
install it from the system CD-ROM supplied with your Macintosh computer.
1
Insert the "Software CD-ROM"
into your computer's CD-ROM
drive.
Insert the "Software CD-ROM" that shows
"Disc 2" on the front of the CD-ROM.
2
Double-click the [CD-ROM] icon
( ) on the desktop.
3
Double-click the [MacOS] folder.
Before installing the software, be sure to read
"ReadMe First". "ReadMe First" is in the
[US-English] folder ([English] folder in areas
other than the U.S.) in the [Readme] folder.
4
Double-click the [Installer] icon
( ).
5
Click the [Install] button.
6
The License Agreement window
will appear. Make sure that you
understand the contents of the
license agreement and then click
the [Yes] button.
in "Extensions Manager" in "Control Panels". If not,
7
Read the message in the window
that appears and click the
[Continue] button.
Installation of the PPD file begins.
After the installation, a message prompting you
to restart your computer will appear. Click the
[OK] button and restart your computer.
This completes the installation of the
software. Next, configure the printer driver
settings.
8
Select [Chooser] from the Apple
Menu.
9
Create a printer.
(1) Click the [LaserWriter 8] icon.
If multiple AppleTalk zones are displayed,
select the zone that includes the printer.
(2) Click the machine's model
name.
The machine's model name usually
appears as [SCxxxxxx]. ("xxxxxx" is a
sequence of characters that varies
depending on your model. Ask your
network administrator for details.)
(3) Click the [Create] button.
(1)
(2)
(3)
35