Printing Pictures; How To Connect To The Printer - Olympus D-600L Manual De Instrucciones

Printer output connector
Prise de sortie
imprimante
Conector de salida del
impresor
130
E
Make sure that the power of the P-300U printer and the
Parallel port
camera are off before connecting.
Port
1
parallèle
Conexión en
paralelo 2
3
4
The Selftimer signal blinks while printing, and other
operations are disabled.
P-300U
The recording date/time can be printed if PRINT (TIME) is
set. (p. 126)
Note:

PRINTING PICTURES

HOW TO CONNECT TO THE PRINTER

Connect the exclusive (parallel) cable (provided with the
P-300U) to the Parallel port of the printer.
Open the connector cover of the camera.
Connect the exclusive (parallel) cable to the Printer output
connector of the camera.
Turn on the power of the printer and the camera.
Because printing is controlled by the camera, the
buttons on the printer are invalid. (Printing will
stop when the power is turned off.)
The LCD monitor display goes off while printing.
When the camera is not operated for 15 seconds,
it cancels the print mode.