Erase All - Olympus D-600L Manual De Instrucciones

M E N U
S H Q / H Q / S Q
+ / –
A E
E R A S E A L L
F O R M A T C A R D
N E X T
E N D
122
1 / 2
: E R A S E A L L
O K
C A N C E L
E R A S I N G
E

ERASE ALL

1
When ERASE ALL is selected from the menu, the screen
on the left appears on the LCD monitor.
2
Move the arrow to OK with the +/– buttons. Press the OK
button to start erasing. "ERASING" appears on the screen.
No other operation can be performed while erasing.
If there are no pictures recorded in the card, "ERASED"
appears on the screen.
Caution:
Never open the Card compartment cover, eject
the card, remove the batteries or disconnect the
AC adapter while erasing pictures. It may destroy
the data in the card.
Note:
When the write-protect adhesive seal is placed
on the card, the Card error mark on the control
panel blinks, and ERASE ALL is not engaged. (p.
68)
When there are pictures protected from other
cameras or PCs, only the unprotected pictures
are erased.
The erasing time varies depending on the
amount of images in the SmartMedia.