Brother P-touch 2400 Manual Del Usuario página 81

Mirror
4
Press to engrave the stamp stencil film, and then automatically cut off.
Print
Alt W O R K I N G
Caps
To affix a stamp:
5
Remove the stamp frame from around the stamp film holder ink pad, one side at a
time, then remove the protective seal covering the ink pad and the backing paper
from the stamp stencil film.
6
With the glossy side of the stamp stencil film upward, align one of its ends with the
slit on the side of the stamp film holder.
7
Hold the end of the stamp stencil film in place with your thumb, then pass the tape
through the guides while pulling it tight.
Length Length
Alt
Undl/Frm
A.Format
Caps
Width
Glossy side
Tape end
Slit
Guides
C O P I E S
1 / 1
Length Length
Undl/Frm
A.Format
Width
77