Transport - GASPARDO PRIMAVERA Empleo Y Mantenimiento

Ocultar thumbs Ver también para PRIMAVERA:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH

3.10 TRANSPORT

If it becomes necessary to transport the machine for a long distance,
it can be loaded onto a railway wagon or a truck. For this purpose,
consult «Technical Data» for weight and specifi c dimensions.
The latter are very useful to check the possibility of driving along all
types of roads. The machine is generally supplied in a horizontal
position with no packing material.
It is therefore necessary to use a system of hoisting with a crane and
cables, or chains of adequate capacity, hooking onto the machine
at the hoisting points marked with the «hook» symbol (15, Fig. 4).
Before proceeding to the hoisting op- erations, make sure
that any any mo- bile elements of the machine are blocked.
Make sure to use a crane with an adequate hoisting capacity
to lift the machine. Hoist the machine with extreme caution
and transfer it slowly, without jerks or abrupt movements.
The operations of hoisting and trans- port can be very dange-
rous if not carried out with the maximum caution; persons not
directly involved should be moved away. Clean, evacuate the
area and delimit the transfer zone. Check the state, condition
and suit- ability of the means at disposition. Do not touch
suspended loads, keep- ing them at a safe distance.
It most be further ascertained that the operational area is free
of obstacles and that there is suffi cient «escape space», me-
aning an area which is free and secure into which one could
move rapidly in case a load should fall. The surface on which
the machine is to be loaded must be horizontal in or- der to
prevent possible shifting.
Once the machine is positioned on the vehicle, make sure that it
remains blocked in its position. Fasten the machine on the platform
of the vehicle by means of cables suitable for the mass which must
be blocked (see «Technical Data» for the weight).
The cables must be fi rmly fastened to the machine and pulled taut
to the anchorage point on the platform. Once transport has been
carried out and before freeing the machine from all its fastenings,
make sure that its state and position are such as not to constitute
danger. Remove the cables and proceed to unloading with the
same means and methods used for loading.
62
CAUTION
DANGER
USE AND MAINTENANCE
Transit and transporting on the public highways
When driving on public roads, be sure to follow the highway
code of the country involved.
The tractor used for transporting the equipment must have the po-
wers shown in the Technical Data table; if necessary, redistribute
the total weights with the addition of ballasts to return
balance and stability to the whole assembly (page 48).
For displacements beyond the work area, the equipment must be
placed in the transportation position:
- Where provided for, make all the moving parts come within the
transport width, locking them with the safety devices (toolbars,
row marker arms, row marker discs, etc.).
- Road movements must be performed with all tanks empty.
- Any transport accessories must be provided with suitable signs
and guards.
When driving on the public roads, fi t on the rear refl ector triangles,
side lights and fl ashing beacon and always make sure that you com-
ply with the Highway Code and any other applicable regulations.
Make sure that the machine dimensions during transfer phases
allow for safe transport when travelling in subways, along narrow
roads, near electrical lines, etc.
The seed-drill must only be transported by road with the tanks
and hoppers empty and at max speed of 25 km/h.
Before driving on to the public roads with the machine hitched
to the tractor, make sure that the devices listed above and/or
the slow vehicle signal and/or the projecting load signal op-
erate correctly. These indicators must be affi xed to the rear
of the implement in a position where they can be clearly seen
by any other vehicle that drives up behind.
ATTENTION
cod. G19503101

Publicidad

Tabla de contenido
loading

Tabla de contenido