Optionals; Tractor Wheel Track Eradicators; Front Prep Unit (Mod. 500-600); Levelling Bar - GASPARDO PRIMAVERA Empleo Y Mantenimiento

4.0 OPTIONALS

4.1 TRACTOR WHEEL TRACK ERADICATORS

The wheel track eradicators should be placed on the same line as
the tyres of the tractor. To adjust the depth of the wheel track era-
dicators, varying the position of pin (A, Fig. 56).

4.2 FRONT PREP UNIT (mod. 500-600)

The prep unit, attached to the front of the planter, is suitable for
seed-planting on roughly tilled ground.
The equipment is attached to the planter by means of points (B) in
Figure 57.
The working depth of the prep unit parts is set by varying the po-
sition of pin (C) fi gure 57.
WARNING: During road transport, stop the preparation unit
using the supplied pin which has to be fi tted into the existing
holes (D, Fig. 57).
D

4.3 LEVELLING BAR

The purpose of the levelling bar is to lightly level the surface of the
fi eld. To adapt it to different ground conditions, its inclination can
be adjusted by varying the position of pin (E) Figure 58.
The bar is adjusted correctly if it works with a small amount of soil
during use. A heavy load would cause the structure to collapse.
cod. G19503101
USE AND MAINTENANCE
B
C

ENGLISH
A
fi g. 56
fi g. 57
E
fi g. 58
65