Serial Cable Installation - Agilent Technologies TV 551 SEM Navigator Manual De Instrucciones

17 Technical Information

Serial Cable Installation

and then screw the gas purge valve (with a torque of 2.5 Nm) as
shown in the following figure.
Figure 47
Figure 48

Serial Cable Installation

The supplied serial cable must be installed when the TV 551/701 SEM
Navigator or the optional vent valve have to be controlled by means
of a remote computer.
The cable is installed fixing the 9 pin D-type connector into the P2
serial connector as shown in the following figure.
Figure 49
258/276 TV 551/701 SEM Navigator User Manual / 87-900-958-01(G)