Assembly - GreenWorks 32042a Manual Del Propietário

SPECIFICATIONS
PRODUCT SPECIFICATIONS
%ODGH 'LDPHWHU LQ
%ODGH $UERU   LQ
&XWWLQJ 'HSWK DW ƒ LQ
&XWWLQJ 'HSWK DW  LQ
Charger Input .................................120 V, 60 Hz, AC only
24V LITHIUM-ION BATTERY PACK
1R /RDG 6SHHG  3 PLQ 530
Motor ............................................................... 24 Volt DC
LOCK-OFF
BUTTON
WIDTH
ADJUSTMENT
KNOB
BEVEL
ADJUSTMENT KNOB
HEX KEY STORAGE
SPINDLE LOCK
BUTTON
English(original instructions)
SWITCH
TRIGGER
LASER
GUIDE
DEPTH ADJUSTMENT
LEVER
Fig.1
EN - 8
KNOW YOUR CIRCULAR SAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
operating features and safety rules.
BEVEL ADJUSTMENT LEVER
The bevel adjustment lever allows you to set the circular
VDZ IRU EHYHO FXWV IURP ƒ WR ƒ ƒ WR ƒ DGMXVWPHQW 
DEPTH ADJUSTMENT LEVER
The depth adjustment lever adjusts the depth of cut from
 LQ WR  LQ
HEX KEY STORAGE
Conveniently stores your hex key for quick blade changes.
LOCK-OFF BUTTON
The lock-off button
accidentalstarting.
SPINDLE LOCK BUTTON
The spindle lock button allows you to secure the
bladewhen turning the blade screw.

ASSEMBLY

UNPACKING
This product requires assembly
Carefully remove the tool and any accessories from
the box. Make sure that all items listed in the packing
list are included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call1-888-
  IRU DVVLVWDQFH
PACKING LIST
 LQ &LUFXODU 6DZ
Saw Blade
Hex Key
Edge Guide
Operator's Manual
If any parts are damaged or missing do not operatethis
tool until the parts are replaced. Failure toheed this
warning could result in serious personalinjury.
reduces the possibility
WARNING
of