Connector Panel - Panasonic PT-L735NTU Instrucciones De Operación

Connector panel

# $
# USB port
(page 31)
The remote control unit can be
used as a personal computer
mouse by connecting the
projector to a personal computer
with the supplied USB cable.
(4-pin square connector)
$ SERIAL connector
(pages 20, 21 and 64)
This connector is used to connect
a personal computer to the
projector in order to externally
control the projector. (RS-232C
compatible)
% RGB1 IN connector
(pages 20 and 21)
This connector is used to input
RGB signals and YP
& RGB2 IN/RGB1 OUT connector
(pages 20, 21 and 45)
This connector is used to input or
output RGB signals and YP
signals. Use the RGB2 SELECT
item in the OPTION menu to
select whether you want input or
output with this connector.
' AUDIO OUT jack
(pages 20 and 21)
This jack is used to output the
audio signals which are input to
the projector. If audio equipment
16-E
NGLISH
% &
P signals.
B R
P
B R
'
( )
is connected to this jack, no
sound will be output from the
built-in speaker.
( RGB AUDIO IN jack
(pages 20 and 21)
Only one system is provided, so
connect the appropriate
connector when using RGB1 or
RGB2.
) S-VIDEO IN connector
(pages 20 and 43)
This connector is used to input
signals from a S-VIDEO-compatible
equipment such as a video deck.
The connector is compatible with
S2 and S1 signals, and projector
aspect is automatically adjusted
according to the type of signal
received.
* VIDEO IN jack
(page 20)
This jack is used to input video
signals from a video equipment
such as a video deck.
+ AUDIO IN L-R (for VIDEO/S-
VIDEO) jacks
(page 20)
Only one system is provided, so
connect the appropriate
connector when using VIDEO or
S-VIDEO.
*
+