White Balance R/G/B - Panasonic PT-L735NTU Instrucciones De Operación

CONTRAST
This adjusts the contrast of the
picture. Press the H button to make
the picture brighter, and press the
I button to make the picture
darker. (Adjust the BRIGHT setting
first if required before adjusting the
CONTRAST setting.)
BRIGHT
This adjusts the darker areas (black
areas) in the picture. Press the H
button if dark areas are too solid (for
example, if hair is difficult to see), and
press the I button if black areas are
too light (grey rather than black).
COLOR
(S-VIDEO/VIDEO/YP
Press the H button to make the
color more vivid in tone, and press
the I button to make the color
more pastel in tone.
TINT
(NTSC/NTSC 4.43/YP
This adjusts the flesh tones in the
picture. Press the H button to make
flesh tones more greenish, and
press the I button to make the
flesh tones more reddish.
SHARPNESS
Press the H button to make the picture
details sharper, and press the I button
to make the picture details softer.
Color Hue Setting
(COLOR TEMP.)
STANDARD
HIGH
LOW
This is used to adjust the white
areas of the picture if they appear
bluish or reddish.
38-E
NGLISH
P only)
B R
P only)
B R
Noise Reduction (NR)
(When S-VIDEO/VIDEO/YP
signals are being input)
If the signal is of such poor quality
that picture interference appears, you
can suppress this interference by
adjusting the NR (Noise Reduction).
To strengthen the effect, press the H
button. To turn it off , set to "0" by
pressing the I button.

WHITE BALANCE R/G/B

(RGB only)
This is used to adjust the white
areas of the picture if they appear
colorised. Press the I button to
make the selected color lighter.
Press the H button to make the
selected color stronger.
TV-SYSTEM
(S-VIDEO/VIDEO only)
AUTO1
AUTO2
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
AUTO1
The projector automatically
distinguishes between NTSC/NTSC
4.43/PAL/PAL60/SECAM signals.
AUTO2
The projector automatically
distinguishes between NTSC/PAL-
M/PAL-N signals.
P
B R