Classification Of The Warnings En; Warning And Information Signs En; Emergency Information En - Abicor Binzel ABIDRIVE CW Instructivo De Servicio

2 Safety
2.4 Classification of the warnings
The warnings used in the operating instructions are divided into four different levels and are shown prior to
potentially dangerous work steps. Arranged in descending order of importance, they have the following
meaning:
Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely critical
injuries.
Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.
Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.
NOTICE
Describes the risk of impairing work results or potential material damage to the equipment.
2.5 Warning and information signs
Following warning and information signs are located on the product:
Symbol
Folgendes Symbol ist auf der Stromversorgung angebracht:
Symbol
These markings must always be legible. They may not be covered, obscured, painted over or removed.
2.6 Emergency information
In case of emergency, immediately interrupt the following supplies:
• Electricity,
• gas
Further measures can be found in the "Power source" operating instructions or in the documentation of further
peripheral devices.
EN - 4
DANGER
WARNING
CAUTION
Meaning
Read and observe operating instructions!
Warning against risk of crushing on rotating rollers!
Bedeutung
Electrostatic discharge
TIG cold wire feeder