Kohler K-4026 Manual De Instrucciones página 11

Adjustment Arrows
Thermometer
Using the Bidet Wash Functions
NOTE: The bidet function will automatically stop after 5 minutes.
NOTE: Bidet functions can also be activated using the manual controls on the toilet.
Using the Front Bidet Wash
Press the [Wake Up] button.
Press the "Front" icon.
Press the "Stop" icon to end.
Using the Rear Bidet Wash
Press the [Wake Up] button.
Press the "Rear" icon.
Adjusting the Water Temperature
NOTE: Adjust the water temperature while the rear or front wash are in use. The temperature level is
shown next to the thermometer in the display.
Make sure the thermometer icon is indicated and [Front: temp] appears in the window.
If needed, select the thermometer icon using the up and down arrows.
Press the right arrow to increase the water temperature or left arrow to decrease the water
temperature. There are three settings available.
Adjusting the Water Pressure
NOTE: Adjust the water pressure while the rear or front wash are in use.
Make sure the water pressure icon is indicated and [Front: pressure] appears in the window.
If needed, select the thermometer icon using the up and down arrows.
Press the right arrow to increase the water pressure or left arrow to decrease the water pressure.
There are three settings.
Adjusting the Wand Position
NOTE: Adjust the wand position while the rear or front wash are in use.
Make sure the wand icon is indicated and [Front: position] appears in the window.
If needed, select the wand postition icon using the up and down arrows.
Kohler Co.
Wake Up
Stop
Menu
Wand
Position
11
Display Window
Front Bidet Wash
Front Rear
Pulsate Oscillate
Deodorizer Dryer
Water Pressure
Pulsate
Rear Bidet Wash
Oscillate
1221754-5-B