Kohler K-4026 Manual De Instrucciones página 15

Servicing the Bidet Wand and Filter
Cleaning the Bidet Wand
NOTE: Use a soft bristle brush to clean the bidet wand.
On the manual control panel, hold down the rear wash or front wash icon until the wand extends
out.
Clean the wand with a wet soft bristle brush and appropriate cleaner.
The wand will automatically retract after 2 minutes. Press the rear wash or front wash icon to
retract if needed.
Cleaning or Replacing the Filter
Unplug the power cord from the outlet.
Turn off the water by closing the water supply stop.
Remove the filter cover.
Remove the filter and inspect it for damage.
If the filter is damaged, replace it.
If the filter is clogged, remove all debris.
Install the filter.
Install the cover.
Open the supply stop.
Kohler Co. 15 1221754-5-B