Hach senslON+ MM 374 Manual De Instrucciones página 19

4. Operation
4.11.3. Measurement
Once the measurement has finished, the corresponding report
will be printed automatically.
The report can be "reduced", "standard" or "GLP" in accord-
ance with the selected option in "System", see page 19.
Reduced report (factory programming)
10-04-2007 17:15
pH+EC MEASURE
Channel 1
...by stability
...
Start measurement
Channel 1
MEASURING MEASURING (
by stability
pH * * * pH 6.23
21.4˚C
* * * 1198
uS/cm @25˚C
Sample 1 00:01 Sample 1
etc.
Report: Standard and GLP
10-04-2007 17:15
pH+EC MEASURE
Channel 1
10-04-2007 17:15
Users
Antonio Sanz
User 2
User 3
User 4
...by stability
...
Start measurement
Channel 1
MEASURING MEASURING (
by stability
pH * * * pH 6.23
21.4˚C
* * * 1198
uS/cm @25˚C
Sample 1 00:01 Sample 1
etc.
Sample report (see System)
Several: The results from the different samples will be printed
one by one until the option MEASURE is exited.
One: A complete report per sample.
Voluntary printing and report repetition (copies)
During measurement in continuous, pressing the key
measured value at that moment is printed. If the measurement is
by stability pressing the key
be obtained.
(If a PC keyboard is used, the F1 key must be pressed).
When measuring in continu-
ous with factory program-
ming, the obtained data
is printed at the end of
the measurement.
)
continuous
21.4˚C
uS/cm @25˚C
00:01
etc.
)
continuous
21.4˚C
uS/cm @25˚C
00:01
etc.
the
a copy of the printed report can
Example of report:
Reduced report,
MEASUREMENT REPORT
Thursday, 14 February 2008
----------------------------------------
CONDITIONS
MEAS. BY STABILITY STANDARD CRITERIA
C.T. Linear 2.00%/'C
----------------------------------------
Sample pH E.C./cm Ts'C
--------- ------ ------- ---- ------ ---
000001 4.01
000002 4.01
----------------------------------------
Standard report,
LABORATORY
TEST
========================================
MEASUREMENT REPORT
Thursday, 14 February 2008
----------------------------------------
pH ELECTRODE
Code:
Serial n.:
pHiso.(pH 7):
CALIBRATED 14-02-2008 08:53:37
----------------------------------------
E.C. CELL
Code:
Serial n.:
CALIBRATED 10-02-2008 08:58:41
----------------------------------------
CONDITIONS
MEAS. BY STABILITY STANDARD CRITERIA
C.T. Linear 2.00%/'C
----------------------------------------
Sample pH E.C./cm Ts'C
--------- ------ ------- ---- ------ ---
000001 4.01
000002 4.01
----------------------------------------
Operator: Pedro Martínez
----------------------------------------
GLP report,
LABORATORY
TEST
========================================
MEASUREMENT REPORT
Thursday, 14 February 2008
----------------------------------------
pH ELECTRODE
Code:
Serial n.:
pHiso.(pH 7):
CALIBRATED 14-02-2008 08:53:37
Technical Sens. A.P.
Buffers %
------------- ----- ----- ---- --- ---
4.01, 7.00 100.3
----------------------------------------
E.C. CELL
Code:
Serial n.:
CALIBRATED 10-02-2008 08:58:41
MOLAR STANDARDS
Standard Constant
----------- ----------
147.0 uS/cm 1.159cm-1
1413 uS/cm 1.153cm-1
----------------------------------------
CONDITIONS
MEAS. BY STABILITY STANDARD CRITERIA
C.T. Linear 2.00%/'C
----------------------------------------
Sample pH E.C./cm Ts'C
--------- ------ ------- ---- ------ ---
000001 4.01
000002 4.01
----------------------------------------
Operator: Pedro Martínez
SN:70802 V1.10
08:53
CHANNEL 1
T.R. 25'C
Time St%
96.9mS 23.7 00:08 25
9.93mS 23.8 00:11 25
SN:70802 V1.10
08:53
50 14T
7890
pH 7.00
5070
801
CHANNEL 1
T.R. 25'C
Time St%
96.9mS 23.7 00:08 25
9.93mS 23.8 00:11 25
SN:70802 V1.10
08:53
50 14T
7890
pH 7.00
T. t. St.
mV 'C s %
-0.1 25 6 25
5070
801
'C Time St%
---- ------ ---
25.3 00:08 25
25.3 00:11 25
CHANNEL 1
T.R. 25'C
Time St%
96.9mS 23.7 00:08 25
9.93mS 23.8 00:11 25
15