To Operate The Jf 5D - 10D As Grain Chopper - JF D Serie Manual Técnico De Operación

OPERATION TECHNICAL MANUAL - MILL 5D - 10D
5- Operation adjustments

5.1- To operate the JF 5D - 10D as grain chopper

a) Loosen latch (1) and raise the cover (2).
b) Remove the countercover (3).
c) Select one of the sieves (4, 5, 6 or 7), according desired
product chips size and install it under the impeller
according picture aside.
NOTE. See dimensions and application of sieves on table
on the next.
d) Remove the countercover (3).
e) Close cover (2), rising and tighten latch (1).
f) Push the plate (8) completely in.
4
5
Sieves kit that come along with the machine
(see sieve chart on page 19)
12
7
6
1
3
4
8
2
17