Installing P-Touch Quick Editor; Installing P-Touch Editor Ver. 3.1 - Brother P-Touch 1500PC Serie Referencia Rápida

Installing P-touch Quick Editor

The P-touch Quick Editor software provides quick ac-
cess to the more simple label-designing features for easy
text input and instant printing of labels. Install the P-touch
Quick Editor software on a Mac as described below.
1 With the PT-1500PC and computer turned
off, connect the PT-1500PC to the Macintosh
using the enclosed USB interface cable. Be
sure to leave the PT-1500PC off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the computer's
CD-ROM drive. A folder opens, allowing you to
view the contents of the CD-ROM.
4 Double-click the P-touch Quick Editor
Installer icon in the folder that appears. The
installer starts up.
5 Select the installation method.
Clicking the Install button immediately starts
installing the most basic options.
About 30 MB of available hard-disk space is
needed to begin installation. In order to install
all options, about 30 MB of available hard-
disk space is needed. If enough hard-disk
space is available, click the Install button.
Clicking the Custom Install button displays a dialog
box that allows you to select which options to install.
12
Only the options with a check mark beside
them are installed. Select the options that
you wish to install, and then click the Install
button to begin installation.
In order to print from the PT-1500PC,
"PT-1500PC Driver" must be selected for
installation.
6 When the installation is finished and the
following dialog box appears, click the Quit
button.
7 When the dialog box appears asking if you
wish to restart the computer, click the Restart
button to restart the computer.

Installing P-touch Editor Ver. 3.1

The P-touch Editor Ver. 3.1 software includes a
variety of more complex functions for printing
barcodes and images, enabling you to design just
about any label that you can imagine. Install the
P-touch Editor Ver. 3.1 software on a PC as de-
scribed below.
1 With the PT-1500PC and computer turned
off, connect the PT-1500PC to the Macintosh
using the enclosed USB interface cable. Be
sure to leave the PT-1500PC off.
2 Turn on the Macintosh.
3 Insert the enclosed CD-ROM into the
computer's CD-ROM drive. A folder opens,
allowing you to view the contents of the CD-
ROM.
4 Double-click the P-touch Editor Ver3.1 folder
to open it.