Crown Molding Lying Flat On Table - Bosch GCM18V-12GDC Instrucciones De Funcionamiento Y Seguridad

1609B06757.qxp_GCM18V-12GDC 3/25/20 12:35 PM Page 55
CROWN MOLDING LYING FLAT ON
TABLE
15
30
with operation. Before switching "ON",
lower head assembly to make sure clamp
clears guard and head assembly.
dry run with the saw Off by conducting a
simulated cutting cycle, and observe the
projected path of the saw blade. Keep
hands at least six (6) inches (152mm)
away from the projected path of the saw
blade.
Saw Operations
36
12
14
Use clamping position
that does not interfere
Be aware of the path of
the saw blade. Make a
30
36
Bevel Scale Settings
For 45° For 38°
For 45°
Spring Spring
Spring
Angle Angle
Angle
Fig. 58
Crown
Molding
15 14 12
Miter Scale Settings
For 38°
Spring
Angle
55