Tabla de contenido
Publicidad
➢ ➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum cleaner.
➢ ➢ During this time the headlight remains on.
➢ ➢ To correct problem, turn off and unplug vacuum cleaner, remove clogs, and/or
clean/replace filters.
➢ ➢ Replace full bag if necessary.
➢ ➢ Wait approximately thirty (30) minutes, plug vacuum cleaner in, turn on to see if
thermal protector has reset. Thermal protector will not reset if vacuum cleaner is not
turned off even if vacuum cleaner cools down.
Hose Swivel
➢ ➢ The hose swivel allows the hose to
➢ ➢ Check hose for twisting before
Edge Cleaner
➢ ➢ Active brush edge cleaners are on
➢ ➢ Guide either side of the Power Nozzle
Thermal Protector
- 34 -
turn without moving the canister.
This is helpful for cleaning in small
areas.
pulling canister.
both sides of the Power Nozzle.
along base-boards or next to
furniture to help remove dirt trapped
at carpet edges.
Publicidad
Tabla de contenido
