Canon PIXMA iP100 Guía De Iniciación Rápida página 10

If installation does not start automatically when the Setup CD-ROM is inserted into your
computer's disc drive, click Start then Computer. (In Windows XP, click Start then My
Computer. In Windows 2000, double-click the My Computer icon on the desktop.) And
double-click the CD-ROM icon on the displayed window. If the contents of the CD-ROM are
displayed, double-click MSETUP4.EXE.
If the AutoPlay screen appears, click Run Msetup4.exe. In Windows XP and Windows 2000,
this screen will not appear.
If the User Account Control screen appears, click Continue. In Windows XP and Windows
2000, this screen will not appear.
To install Adobe
When a message asking for your confirmation to restart your computer may appear during the
installation process, click OK. The system is restarted automatically. While restarting, do not
remove the Setup CD-ROM.
We would appreciate it if you would take part in the PIXMA Extended Survey Program
regarding the use of Canon printers. If Do not agree is clicked, the PIXMA Extended Survey
Program will not be installed but you can use the printer normally.
If the connection is not recognized, follow the procedure below according to the connection
method.
When connecting with a USB cable
Click Cancel to quit the Printer Connection screen, then follow the on-screen instructions.
When the Easy Install screen appears, click Back and then click Exit to cancel installation.
Next turn off the printer and restart your computer. Then follow the instructions in your setup
sheet to install the printer driver.
When connecting through infrared communication
Click Cancel to quit the Printer Connection screen, then follow the on-screen instructions.
When the Easy Install screen appears, click Back and then click Custom Install, then
follow the on-screen instructions. When the Printer Connection screen appears, click
Manual Selection, select IR, click Next, then follow the on-screen instructions.
When performing infrared communication, make the IrDA port of each other's device stand
opposite to each other. Distance between the IrDA ports should be 8 inch (20 cm) or less.
Solution Menu
This menu screen helps you to easily launch bundled applications or on-screen manuals.
Also, you can easily access useful web sites to get tips on how to use your printer.
Experience how easy it is to launch menu items by using the menu screen that appears
automatically when your computer starts up.
For details, refer to the Introduction to Solution Menu on-screen manual.
My Printer
This application helps you to operate this printer.
Use this application to open the printer driver or the status monitor screen and confirm or
change both the printer settings or status.
Also, this application has a menu to provide troubleshooting tips when problems arise.
Double-click the icon on the desktop and experience how easy operating the printer can be.
Information for Macintosh
Since Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not
supported, do not connect the printer to these. Use Mac OS X v.10.3.9 or later.
Do not remove or insert the USB cable during installation, as this may result in the computer
or printer not operating normally.
Quit all running applications before installation.
If installation does not start automatically when the Setup CD-ROM is inserted into your
computer's disc drive, double-click the CD-ROM icon on your desktop.
6 Installing the Software
®
RGB (1998), click Custom Install and follow the instruction on the screen.