gaviota KYMA Manual De Instalación página 53

Step 27. (Common)
a. Before installing the supports, for the wall or the ceiling, make sure the
contact surface has no irregular areas.
b. Any unevenness must be fixed, making sure the supports and the surface
are level.
c. Align the supports and install.
•
Front assembly
ALIGNMENT
All dimensions in mm, unless otherwise stated.
FRONT VIEW
Step 28. (Common)
Take off the clamp of all supports with a no. 5 Allen key.
TAKE OFF
KÝMA
CEILING
Regulation screw
IMPORTANT:
Regulate all supports to the maximum
horizontal position with a no. 17 spanner.
53