gaviota KYMA Manual De Instalación página 64

KÝMA
(All the example assembly images are a Type 4 configuration with motor to the right).
Step 59. (Common)
Assemble and fix the covers to the charge profile with a DIN7982 2.9x9.5 screw
on each one, right and left, with a Phillips screwdriver.
Step 60. (Common)
Move the arm safety band towards the elbow, to have enough space to fix the
arms to the charge profile. This step will be carried out in each one of the arms
in the configuration.
The arms have a heavy spring. Be careful during this step.
64
Step 61. (Common)
Screw the connector to the flange with two DIN7991 M6x20 screws. The flange
was placed during Step 57. Use a no. 4 Allen key. This step will be carried out
in each one of the arms in the configuration.
Step 62. (Common)
Place the frontal profiles, introduced in Step 57, in the correct position and
attach with a no. 3 Allen key. Repeat in all the arms assembled in the system.
Align the support frontal profile of the charge
profile with the arm support frontal profile
Align the elbow frontal profile of the
charge profile with the arm elbow
All dimensions in mm, unless otherwise stated.