gaviota KYMA Manual De Instalación página 62

KÝMA
(All the example assembly images are a Type 4 configuration with motor to the right).
b. Mount the second box upper profile to the box. Move the mounted flange
from the first upper profile and place it equidistant between both profiles.
c. Once the flange is in the correct position, tighten the six DIN7380 M6x8
screws with the no. 4 Allen key.
62
Step 56. (Common)
Step 57.
a. Assemble the charge profile. Mount all the components required on the
charge profile — closure frontal profiles, arm connector flanges and charge
profile connection flanges — in both profiles.
b. Introduce the first profile in the canvas and place it in position.
Attach the box's upper profiles with two
DIN7981 4.2x25 self-drilling screws, one
on each side, with a Phillips screwdriver.
All dimensions in mm, unless otherwise stated.