Assembling Cleaner - Hoover WindTunnel Instrucciones De Operación

STEP 1 Unpack carton
1
B
A
Remove all parts from carton
1
and identify each item shown.
Make sure all parts are located
before disposing of packing.
A. Handle section
B. Cleaner body
C. Hose, cleaning tools and wands
D. Handle bolts and nuts packet
(in bag with operating instructions)
STEP II Attach handle
2
A
Remove bag door on cleaner
2
body by pushing down at top
of door and pulling door outward.
Switch (A) above bag door should
be in OFF position.
2
C
D
3
Slide handle onto cleaner body.
3
F
E
Not required for assembly:
E. Optional Paper filter bag
(Cloth bag already installed in cleaner)
F. Extra belt
(One already installed in cleaner)
4
Push bolts into holes on back
4
of handle.