Installation Procedure - Honeywell HX 85 Montaje Y Funcionamiento

Installation procedure

Installation procedure
Mounting
• Mount HX 85
• Connect devices to HX 85
• Set operating mode at DIP switches
Binding (install sensors)
• Activate binding at the HCM 200D (or other operating devices)
• Execute binding at the HX 85
Assigning lifestyles (optional)
A lifestyle that is triggered when a state change occurs can be
assigned to a digital input (X-10) or a device address at the
HCM 200D.
Transmitting status of the digital inputs
The current states of the digital inputs can be transmitted to the
HCM 200D with the press of a button on the HX 85.
46