Tabla de contenido
Publicidad
B
Figure 10 - Cleaning spray tip
Cleanup
5. Remove thumbscrews from bot-
tom of gun body (see Figure 11).
Thumbscrews
Figure 11 - Location of thumbscrews
Cup Gun Lid
Figure 13 - Reassembling piston, lid, swirl valve and spray tip
3
STEP
STEP
S TEP
U
& C
SE
(Cont.)
Piston
6. The lid portion body will pull away
from rest of gun body. Pull piston
out from front of gun body and
LEAN
clean thoroughly (see Figure 12).
C
Figure 12 - Cleaning piston parts
7. Reassemble piston, lid, swirl valve,
and spray tip (see Figure 13).
8. Squirt a few drops of the oil pro-
vided into the suction hole of gun
body lid. Plug in power cord and
pull trigger in order to coat inner
parts for storage.
9. Screw gun body back onto paint
canister. The Powered Stainer or
Painter is now ready for the next
project.
Piston Spring
7
Piston/Valve Cylinder
Swirl Valve
Spray Tip
Assembly
www.chpower.com
EZ300 Series
3
STEP
STEP
S TEP
U
& C
SE
LEAN
Publicidad
Tabla de contenido
