Warranty; Procedure In Case Of Repair; Product Specifications; Delivery Form - Ivoclar Vivadent bluephase 20i Instrucciones De Uso

Ocultar thumbs Ver también para bluephase 20i:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62

Warranty /

Procedure in case of repair

The warranty period for bluephase 20i is 3 years from the
date of purchase (battery 1 year). The warranty includes an
LED operating life of 300 hours. Malfunctions resulting from
faulty material or manufacturing errors are repaired free of
charge during the warranty period. The warranty does not
provide the right to recover any material or non-material
damage other than the ones mentioned. The apparatus
must only be used for the intended purposes. Any other
uses are contraindicated. The manufacturer does not accept
any liability resulting from misuse and warranty claims can-
not be accepted in such cases. This is particularly valid for:
• damage resulting from improper handling, especially
incorrectly stored batteries (see Technical data:

Transportation and storage conditions).

• damage to components resulting from wear under stan-
dard operating conditions (e.g. battery).
• damage resulting from external influences, e.g. blows,
drop to the floor.
• damage resulting from incorrect set-up or installation.
• damage resulting from connecting the unit to a power
supply, the voltage and frequency of which do not com-
ply with the ones stated on the rating plate.
• damage resulting from improper repairs or modifications
that have not been carried out by certified Service
Centres.
In case of a claim under warranty, the complete apparatus
(handpiece, charging base, power cord and power pack)
must be returned, carriage paid, to the dealer or directly to
Ivoclar Vivadent, together with the purchase document. Use
the original packaging with the corresponding cardboard
inserts for transportation.
Repair work may only be carried out by a certified Ivoclar
Vivadent Service Center. In case of a defect that cannot be
rectified, please contact your dealer or your local Service
Center (see addresses on the reverse side). A clear descrip-
tion of the defect or the conditions under which the defect
occurred will facilitate locating the problem. Please enclose
this description when returning the apparatus.

Product specifications

Delivery form

1 Charging base, 1 Power cord, 1 Power pack, 1 Handpiece
1 Battery (LI-Po, 1 10>8 mm light probe, 1 Anti-glare shield, Sleeves,
1 Set of Operating Instructions

Accessories

The following accessories are available for bluephase 20i:
REF
Description
627389
Light probe 10>8 mm, black (G2)
608538
Pin-point light probe 6/2 mm, black (G2)
551756
Anti-glare cones
592496
Anti-glare shield
627299
bluephase 20i charging base (G2)
627300
bluephase 20i battery (G2)
627298
bluephase 20i handpiece (G2)
607922
bluephase meter
608554
bluephase sleeves (G2)

Technical data

Operating voltage charging base 5 VDC
Operating voltage handpiece
3.7 VDC with battery
5 VDC with power pack
Power Pack
100-240 VAC / 50-60 Hz /
max. 0.4 A / Output 5 VDC
TYPE 15.2630

Operating conditions

Temperature
+10 °C to +40 °C (+50 to +104°F)
Relative humidity
30 % to 75%
Ambient pressure
700 hPa to 1060 hPa
Dimensions of the charging base L=205mm; W=150mm; H=85mm
Weight of the charging base
250 g
Charging time
approx. 2 h (with the battery empty)
Power supply of the handpiece
Li-Po battery
Max. battery time
approx. 45 min.
(with a new, fully charged battery)
Light source
polywave LED
Wavelength range
380–515 nm
LED-Class 2
LED LIGHT
DO NOT STARE INTO BEAM
CLASS 2 LED PRODUCT
Max. 5.11 mW / Wavelenght 380 - 515 nm
Light intensity
2,000 - 2,200 mW/cm
Operation
6 min. on / 4 min. off (intermittently)
Dimensions of the handpiece
L=260mm; W=42mm; H=120mm
Weight of the handpiece
(incl. battery) 245 g
Transportation and storage conditions:
Temperature
-20 °C to +60 °C (-4 to 140°F)
Relative humidity
10% to 75%
Ambient pressure
500 hPa to 1060 hPa
bluephase 20i has to be stored in closed, roofed rooms.
Protect the device from severe jarring.
Battery
• Do not store at temperatures above 40 °C / 104 °F (or 60 °C / 140 °F
for a short period). Recommended storage temperature 20–25 °C (68–77 °F).
• Always store the battery charged and
• not for longer than 6 months.
2
19

Publicidad

Tabla de contenido
loading

Tabla de contenido