Helicoidal Transmission Box; Selective Box Of Chop Size - JF 40 MAXXIUM Manual Técnico De Operación

7.2- Helicoidal transmission box

1- Leveling check (at each 70 hours of use)
a) Machine need to be on normal work temperature.
b) Remove the upper plug (1) and put grease until it left
the plug orifice level (2).
c) Than place again plugs 1 and 2.
Use NLGI 00 grease. That grease has a
fluidity level that allows to be sprinkled.
d) Than close again the plugs.

7.3- Selective box of chop size

1- Leveling check
a) Check level through plug (4).
b) Fill level through upper plug (5).
Use SAE 150 oil.
c) The upper plug (5) has a breather; make sure it is
always free.
28
1
2
5
4