When Operating The Machine - JF 40 MAXXIUM Manual Técnico De Operación

OPERATION TECHNICAL MANUAL - FORAGE CHOPPER JF 40 - JF 50 - JF 60 MAXXIUM

When operating the machine

Attention:
Whenever there is an instruction in the
manual telling the operator to turn the
machine off and to uncouple the cardan
from the tractor, the procedure for re-
coupling the cardan and starting the
machine again should occur only at the
end of the operation
1- The forage chopper JF Maxxium had been developed
exclusively to chop forages to animal food.
2- Feed the machine in order that your hands do no go
beyond the superior part of the feeding nozzle, avoiding
the contact with the feeding drums.
3- Do not use it to chop tree branches or another rigid
material.
4- To more security fasten the machine on a plain and
rigid surface.
5- Never attempt to adjust or repair components with the
machine in movement.
6- Do not leave the machine in a place that can be
runned by children or not quality people.
7- The forage chopper line Maxxium has a mechanism
that pull the material to be chopped. Introduce only the
product end and leave the equipment pull it.
8- Always the machine is not in use, leave the speed
selections box in neutral range.
9- Avoid the formation of accumulations of grease, oil or
dirt on the machine.
10- Do not operate the machine without covers or
protective structure
It is absolutely prohibited feed the forage
chopper without the feeding nozzle and
the discharge tube, or up the same, thus
creates an imminent risk of serious injury
to the operator and may cause amputation
of limbs or death.
7