When Making Maintenance In The Machine - JF 40 MAXXIUM Manual Técnico De Operación

OPERATION TECHNICAL MANUAL - FORAGE CHOPPER JF 40 - JF 50 - JF 60 MAXXIUM

When making maintenance in the machine

1- The machine must be turned off and disconnected from the tractor for any type or
maintenance and lubrication.
2- Observe the right types and amounts of the recommended lubricants to lubricate the
different components.
Machine transport on roads and streets
Notes:
Machine transport with the tractor must not be done on roads and streets. Such
practice must be limited to inside the farm properties and rural zones.
Refer to the traffic department for the regulations and laws in your region about the
possibility of transporting the machine with the tractor on certain parts of the roads.
Request guidance, authorizations and procedures in writing.
Always displace the tractor in compatible speeds according to the ground or roads.
Set the forage chopper on the truck body using ropes and put chocks under the
wheels (the model on wheels), according the diagram below.
Note that the height for transport (A). If it is necessary to reduce it, for security
reasons, remove the chute (1).
1
9