Presentation; Safety Precautions - Chauvin Arnoux C.A 5210 G Manual De Empleo

The C.A 5210 G and C.A 5220 G are designed for the daily needs of professionals
in electricity.
They have a dual display :
- digital 4000 counts
- 40 segment bargraph
The range selection is automatic, with the possibility of manual selection on the
C.A 5220 G. It switches Off automatically if no control or function button is pressed
for 30 minutes.
For the safety of the user, these multimeters meet the most demanding
international standards; firstly : double insulation
IEC 1010-1-III-2).
Model C.A 5220 G, which is more complete, in particular allows the direct
measurement of current and frequency measurement (see Description chapter).
Never use on DC or AC networks higher than 600V rms.
Never open the case of the multimeter before having disconnected it from all
electric sources.
Never connect to the circuit to be measured if the case of the instrument is not
correctly closed.
Before any measurement, check the correct position of the leads and of the
selector switch.
Never make resistance measurements on a live circuit.
For the C.A 5220 G multimeter, when making current measurements, always
switch Off the power supply to the circuit before connecting or disconnecting
the instrument to the circuit.

PRESENTATION

SAFETY PRECAUTIONS

18
(in accordance with