Continuity Sound Test; Resistances [Ω] - Chauvin Arnoux C.A 5210 G Manual De Empleo

CONTINUITY AND RESISTANCES
Never test a resistance on a live circuit
Connect the leads to the multimeter and to the circuit or the component to be
tested.
Place the selector switch on the ohmmeter function
Press the Ω/
measurement and vice versa.
Automatic range selection: read the measured value
Memorise the value, if necessary, by pressing the HOLD button.
C.A 5220 G only
If necessary, press the following buttons:
RANGE to select the range manually
MIN.MAX to read the min or max values
to light the display
RESISTANCES
Ω Ω Ω Ω Ω
Digital
resolution
Bargraph
resolution
Accuracy
Voltage
on open
circuit
Protection

CONTINUITY SOUND TEST

On the 400 Ω range, continuous beep for a resistance R ≤ 40 Ω
button to change from continuity sound test to resistance
400 Ω
4 kΩ
0.1 Ω 1 Ω
10 Ω 100 Ω
± 1.5 %
R ± 8
counts
500 V rms and 750 V peak
40 kΩ 400 kΩ
10 Ω 100 Ω
1 kΩ 10 kΩ
± 1.5 % R ± 3 counts
≤ 0.5 V
23
Ω
4 MΩ 40 MΩ
1 kΩ 10 kΩ
100 kΩ 1 MΩ
± 3 % R
± 5
counts