Frequencies [ Hz] - Chauvin Arnoux C.A 5210 G Manual De Empleo

Connect the leads to the multimeter and in parallel to the circuit to be tested.
Place the selector switch on the Hz voltage frequency function
Automatic range selection : read the measured value
NB : The bargraph is non-operational on frequency measurement
If necessary, press the following buttons
- MIN.MAX to read the max or min value
- to light the display
FREQUENCIES
Hz
Resolution
Accuracy
Permitted
overload
Operating range
(1) The RANGE button on this function selects the trigger level :
10 mV, 100 mV or 1V (10 mV is selected when the instrument is
switched on).
FREQUENCIES
(C.A 5220 G only)
(extension to 10 000 counts)
100 Hz 1 kHz
0.01 Hz 0.1 Hz
± 0.1 % reading ± 2 counts
600 V rms and 900 V peak
26
10 kHz 100 kHz 200 kHz
1 Hz 10 Hz
4 V to 600 V
100 Hz