ABB 6550-500 Manual De Instrucciones página 53

Operation
Operation with Busch Watchdog
Type Designation in Busch Watchdog
In these Operating Instructions, not only the Busch
®
Watchdog
but also the Comfort Sensor (Art. No. 6800-xxx-10x-
500(M)) are referred to as "FM Sensors". Pay attention to
the correct type allocation in each case in the description.
The type designation is to be found on the back of the
respective device.
After interruption of the supply voltage or connection to the
supply, irrespective of the brightness set on the Sensor,
the Memory Pushbutton Controller switches the connected
consumers on
– for 80 seconds when FM Sensors 6810-21x-10x-500
are used;
– for the time set (at least 1 minute with time settings of
< 1 minute) - with the exception of short-time impulse
when FM Sensors 6800-xxx-104-500(M), or higher,
are used.
Standard Sensor (Art. No. 6810-21x-10x-500),
ENG
®
FM Sensors
®
Program
53