Playcore Swing-N-Slide NE 5010 Instrucciones De Montaje página 193

Project 515
Fig.11
(2)
2-1/2'' Deck Screws
(2 per joint)
FIG. 11a
Fig.11a
(4)
2'' screws
2-1/2'' screw
L. Install Deck Boards
1. Install 5/4'' deck boards to structure as shown (Fig. 11).
2. Use two 2-1/2'' screws at each end of deck boards. Where shelf
bracket blocks screw path, center board and place one screw
on either side.
3. ttach under deck support board as shown in (Fig. 11a).
25