Playcore Swing-N-Slide NE 5010 Instrucciones De Montaje página 218

Project 515
1. Mark locations of Climbing Rocks on the Climbing Wall in a pattern that
2.Drill holes through the wall at the desired locations using a 3/8" drill bit.
3. Make sure the Climbing Wall and Climbing Rock connections are secure
Climbing Rock
Climbing Rock
Fig. 42
(2) 2'' Hex Head Bolts
Climbing Rock Installation
will easily allow your child to climb to the deck. Make sure the bolt hole
locations are clear of wall supports before drilling.
Install Climbing Rocks as shown in (Fig. 42).
before allowing any children to play on the Climbing Wall.
(2)"T" nuts
3/8" Holes
Hold (rock)
(1) Loc Washer per bolt
(1) Flat Washer per bolt
50 50