Playcore Swing-N-Slide NE 5010 Instrucciones De Montaje página 44

ProJect 512
Fig. 42
S. nchor-It Installation (optional).
Instructions for nchoring Swing•N•Slide
1. Determine the final location of your activity center.
2. Place the Anchor-It stakes adjacent to the base and near the corners of your activity center (at the bottom of the
legs on swing sets) and twist the auger-style stakes into the ground until only the loop is exposed.
3. Place the metal strap through the loop of the Anchor-It stake and secure it to the unit with a lag screw and
washer as illustrated to the right. Note: Attach the strap to the unit with as little play as possible using whatever
holes in the strap that work best.
Anchor-It
(optional, sold separately)
metal strap
Anchor-It
stake
Flat Washer
1-1/2"
lag bolt
ctivity Centers
44