Electrical Information - Kobalt XC302000 Manual Del Usuario

ASSEMBLY INSTRUCTIONS

ELECTRICAL INFORMATION

WARNING
Risk of Explosion. Disconnect,
tag and lock out power source,
then release all pressure from the
system before attempting to install,
service, relocate or perform any
maintenance.
NOTICE
Unit care and maintenance. Damage to the
motor from improper electrical voltage or
connection will void the warranty.
Do not use an extension cord, use a longer air hose.
The 120 volt, 15 amp units can be operated on a 120 volt, 15 amp circuit under the following
conditions:
1. No other electrical appliances or lights are connected to the same branch circuit.
2. Voltage is 120 Volts.
3. Circuit is equipped with a 15 amp circuit breaker or a 15 amp slow blow fuse type T
(For Canada use Type D).
4. The length of copper wire between the outlet and circuit breaker is not longer than 40 ft. of
14 AWG or 70 ft. of 12 AWG.
WARNING
Risk of Personal Injury or Damage to
Personal Property. Overheating, short
circuiting and fire damage will result from
inadequate wiring.
WARNING
Risk of Shock. Improperly
grounded motors are shock
hazards. Make sure all the
equipment is properly grounded.
Improper installation of the
grounding plug is able to result in a
risk of electric shock. When repair
or replacement of the cord or plug
is required, do not connect the
grounding wire to either flat blade
terminal. The wire with insulation
having an outer surface that is
green with or without yellow stripes
is the grounding wire.
10