Hardware Contents; Preparation - Kobalt XC302000 Manual Del Usuario

PACKAGE CONTENTS
PART DESCRIPTION
Check valve - One-way valve that allows air to enter the tank, but prevents air in the
D
tank from flowing back into the compressor pump.
E Belt Guard - Covers the belt, motor pulley and flywheel.
Tank Drain Valve - This valve is located on the bottom of the tank. Use this valve to
F
drain moisture from the tank daily to reduce the risk of corrosion.
G Tank Pressure Gauge - Indicates amount of air pressure stored in the tank.
Hose Pressure Gauge - Indicates amount of air pressure in hose used to operate
H
tools. This pressure is increased or decreased by the regulator.
Regulator - The regulator controls the amount of air pressure released at the hose
I
outlet.
J Air Filter - Keeps debris and particulates out of the air flowing into the compressor.
K Breather - Vent for crankcase.
HARDWARE CONTENTS (shown actual size)
AA
5/16 in. x
18 Spinlock Nut
Qty. 2

PREPARATION

Before beginning installation and/or assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or damaged, do not
attempt to assemble or use the product.
WARNING
Risk of Personal Injury. Do not operate unit
if damaged during shipping, handling or use.
Damage may result in bursting and cause
injury or property damage.
BB
Rubber Foot
Qty. 2
7
QTY.
1
1
1
1
1
1
1
1