To Install Replacement Cable; Accessories - RIDGID K-400 Manual Del Usuario

K-400 Drain Cleaning Machine
3. Pull end of old cable from drum and discard.

To Install Replacement Cable

1. To make cable installation easier, completely uncoil
new cable before proceeding. Use caution when re-
moving the cable from the package. The cable is
under tension and could strike the user. Adding a 30
degree bend about 4 inches from the drum end of
cable will facilitate it entering the drum.
2. Insert about 24 inches of cable through the guide
tube into the drum.
NOTICE Cable should coil into the drum in a count er-
clockwise direction (Figure 17) .
Figure 17 – Coil Cable Into Drum As Shown
3. Reach inside the drum and maneuver end of cable so
that it is between the cable clamp and back plate. The
end of the cable should extend at least 3" past the
clamp.
4. Retighten the screws to clamp the cable against the
back plate and back wall of the drum.
5. Feed cable into drum.

Accessories

WARNING
Only the following RIDGID products have been de-
signed to function with the K-400 Drain Cleaning
Machine. Other accessories suitable for use with
other tools may become hazardous when used on
the K-400. To prevent serious injury, use only the ac-
cessories specifically designed and recommended
for use with the K-400, such as those that follow.
16
IW (Integral Wound) Solid Core Cables
Catalog Model
No. No. Description
87577 C-31IW 50' (15m) IW Cable
87582 C-32IW 75' (23m) IW Cable
87587 C-33IW 100' (30m) IW Cable
91037 — Repair End for IW Cable
87592 C-44IW 50' (15m) IW Cable
87597 C-45IW 75' (23m) IW Cable
91042 — Repair End for
Tools – Fits C-31IW, C-32IW, C-33IW, C-44IW and C-45IW
Catalog Model
No. No. Description
62990 T-201 Straight Auger, 5" Long
62995 T-202 Bulb Auger, 1
63000 T-203 Bulb Auger
63065 T-217 Drop Head, 4" Long
63005 T-205 "C" Cutter 1
63010 T-206 Funnel Auger, 3" Long
63015 T-207 Spiral Cutter, 1
63020 T-208 Spiral Cutter, 1
63025 T-209 Spiral Cutter, 2"
63030 T-210 Spade Cutter, 1"
63035 T-211 Spade Cutter, 1
63040 T-212 Spade Cutter, 1
63045 T-213 4-Blade Cutter, 1"
63050 T-214 4-Blade Cutter, 1
63055 T-215 4-Blade Cutter, 1
63060 T-216 Chain Knocker, 2"
49002 T-260 Tool Set (3/8"- K-400)
– T-202 Bulb Auger
– T-205 "C" Cutter
– T-211 Spade Cutter
– A-13 Pin Key
12128 T-240 Tool Set (3/8"- K-400)
– T-202 Bulb Auger
– T-211 Spade Cutter
– A-13 Pin Key
Accessories
Catalog Model
No. No. Description
41937 — RIDGID Drain Cleaning
Gloves, Leather
70032 — RIDGID Drain Cleaning
Gloves, PVC
59230 A-13 Pin Key For
59225 A-12 Pin Key For
26773 — K-400 AUTOFEED Assembly
27048 — K-400 Drum Assembly
92607 — 3
92682 — 3
92687 — Coupling
26778 — Guide Hose
51317 C-9 Trap Leader
59982 — Cable Rust Inhibitor 1qt.
59987 — Cable Rust Inhibitor 1gal.
Weight
lb.
18
26
34
0.5
27
39
1 / " IW Cable 0.6
2
Replacement
Blade(s)
—
1 / " O.D. —
8
7 / " O.D. —
8
—
3 / " 97835
8
—
1 / " 97840
4
1 / " 97895
2
97900
97905
3 / " 97825
8
3 / " 92850
4
97795
3 / " 97910
8
3 / " 97915
4
98000
—
—
Weight
lb.
1 /
2
3 / " Cable —
8
1 / " Cable
2
2
10
/ " x 1 / " Tool Adapter 1 /
8 2 2
/ " x 1 / " Drop Head Adapter 1 /
8 2 2
1 / " Drop Head Tool 1 /
2 2
2
5
2 1 /
2
8 1 /
2
kg
8.2
11.8
15.4
0.2
12.2
17.7
0.3
kg
0.2
—
0.9
4.5
0.2
0.2
0.2
1
2.2
1.2
3.8