MV Agusta F3 ORO Serie Manual De Uso página 100

3.7.2. General display
Traction control level display
Indicates the traction control level curren-
tly selected.
Control unit mapping display.
Indicates the number of the control
unit mapping currently selected.
Gear display
It displays the currently engaged
gear. "N" stands for "neutral".
Clock
Indicates the current time.
"TOTAL" odometer:
It displays the total distance covered; from 0 to 999999 (Km or miles)
Trip counter 1, "TRIP 1"
It displays the length of a trip; from 0 to 999.9 (Km or miles)
Trip counter 2, "TRIP 2"
It displays the length of a trip; from 0 to 999.9 (Km or miles)
Chronometer
It displays the time measured by the chronometer
CONTROLS AND INSTRUMENTS
It displays the speed of the motorbike. It can be given
in kilometres per hour (Km/h) or in miles per hour
(Mph). The full scale measures 300Km/h (186 Mph).
Danger - Notice: if the temperature is high, stop
the motorbike and check the coolant level. If it
needs to be filled up, contact a MV Agusta licensed
service centre (see § 3.8). If the warning light turns
on even if the level is adequate, stop driving and
contact a MV Agusta licensed service centre.
- 25 -
Speedometer
Thermometer
It displays the temperature of the
coolant by turning on a variable
number of segments on a gradua-
ted scale. When the temperature
falls outside the normal operating
range, it may display one of the
following information:
- the display shows just one
blinking segment; it means that
the temperature is low;
- all segments are on, while the
upper segment is blinking; it
means that the temperature is
high.
3
3