Oakley GMT Manual De Instrucciones página 6

08 GMT INSTRUCTION MANUAL
FINE TUNING THE INSTRUMENT
The watch design includes two reset procedures. During normal use, these procedures will rarely be necessary.
If the World City hand does not precisely point to the city markers on the bezel, reset the hand by doing
the following.
BUTTON B BUTTON A
TO RESET THE WORLD CITY HAND:
1. Pull the main crown out to the second click position.
2. Press Button A or Button B to adjust the World City
hand to the 12 o'clock position, straight up. (The
buttons move the hand in opposite directions. Press
and hold a button to advance the hand rapidly).
3. Push the main crown back in to the normal position.
4. Set the time and date. Follow the instructions under
"SETTING THE WATCH FOR THE FIRST TIME."
5. Set the World City hand. Follow the instructions
under "SETTING LOCAL TIME FOR A WORLD CITY."
6. Reset the alarm if desired.
If the watch hands move improperly, reset the computer
circuit by doing the following. (Note: The small second
hand will automatically move in two-second intervals to
indicate the battery is running low. In this case,
resetting the computer circuit is not necessary. See
"LOW BATTERY INDICATOR" for more information).
TO RESET THE COMPUTER CIRCUIT:
1. Pull the main crown out to the second click position.
2. Press Button A and Button B simultaneously.
3. Push the main crown back in to the normal position.
4. Follow all instructions listed under "TO RESET
THE WORLD CITY HAND." (See "FINE TUNING
THE INSTRUMENT").
The miniature battery that powers the watch is designed to last approximately two years. However, because the
battery is inserted at the factory for extensive performance checks, its actual life, once in your possession, may
be less.
When the battery is running low, the small second hand will move in two-second intervals. If this occurs, the
watch will continue to display time accurately but the battery should be replaced as soon as possible.
Note: The alarm will not sound if the battery is running low. This is necessary to extend the remaining battery life).
TO REPLACE THE BATTERY:
• Battery replacement may be performed only by an Authorized Oakley service center. Any attempt to open the
watch case by persons other than Authorized Oakley Service Professionals will void the product warranty.
Within the United States, call Oakley global headquarters at 1-800-403-7449 to find an Authorized Oakley
Timepiece Dealer or Service Professional near you. Customers outside the United States should contact their local
Authorized Oakley Timepiece Dealer or visit our Web site at www.oakley.com for the number of the nearest
Oakley distributor.
• After the battery is replaced, reset the watch by following all instructions listed under "TO RESET THE WORLD
CITY HAND." (See "FINE TUNING THE INSTRUMENT").
BAND ADJUSTMENT
If links need to be added or removed from the band, the adjustment should be done by an Authorized Oakley
Timepiece Dealer. Do not attempt to shorten the band by removing links yourself, as this may result in damage to
the bracelet.
GMT INSTRUCTION MANUAL 09
LOW BATTERY INDICATOR