Citizen CHU305 Manual De Instrucciones página 14

4
5
6
00_CHU305_USA.indb Eng-14 00_CHU305_USA.indb Eng-14
Press the " START/STOP" switch.
• A beep is heard and all digits displayed is an initial display, indicating that the
monitor is functioning normal.
• The cuff is pressurized automatically.
* If the unit judges that pressurization is insufficient, it automatically repressurizes.
* The unit automatically sets the pressure based on the previous measurement.
* is displayed when a pulse is detected.
* When you want to stop measurement, press the "
The cuff is deflated and measurement stops.
* If the previous user had a high pressuer setting, that high pressure will
automatically be used for the current measurement.
* If the pressurization value exceeds 260 mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
" START/STOP" switch again. The cuff deflates, and the power turns off.
The measurement results are displayed.
Hypertension Classification lndicator
( See page 15)
Finishing measurement.
• Press the " START/STOP"
switch to turn the monitor off.
START/STOP" switch.
• Once measurement is complete,
the cuff deflates and the
measurement results (systolic/
diastolic blood pressure values,
pulse) are displayed.
* Systolic/diastolic blood
pressure values and pulse are
displayed alternately.
* Provided there is no error in
the measurement results, they
are stored automatically.
- Eng 14 -
START/STOP
Switch
2015/01/13 19:53:20 2015/01/13 19:53:20