Promax PRODIG-3 Manual Del Usaurio página 105

USER'S MANUAL. PRODIG-3
In this way the characterisation of the band will be faster and easier when causing
that the equipment only analyses a shorter set of channels.
Whenever a new process of exploration is activated, the PRODIG-3 analyses all
the present channels in the active channel plan, which acts as pattern channel plan
specified by means of the option CHANNEL SET from configuration measurement
menu: CONFIGURATION
If during exploration or automatic identification process the PRODIG-3 detects
new parameters for some channel or frequency a new list will be generated with the
information updated and will be saved with the name of the original channel plan
followed by the extension: _0x. (See the following Figure).
The user can delete any channel list, or remove and add channels from another
standard list by means of the editing options offered by the
The PRODIG-3 allows directly changing the tuned channel pertaining to the active
channel plan by means of the horizontal
the channel tuning field
[12] operation modes is possible to check cyclically the entire active channel list.
03/2008
[17].
Figure 9.- New channel plan generation process.
[24] and in the TV
UTILITIES [22] menu.
cursors [6]. From this way, once selected
[10] and MEASUREMENTS
Page 29