Quick User Guide - Promax PRODIG-3 Manual Del Usaurio

USER'S MANUAL. PRODIG-3

4 QUICK USER GUIDE

STEP 1.- Battery charging
1.
Connect the DC external charger to the equipment through connector [31] located
on the lateral panel.
2.
Connect the DC charger to the mains.
3.
When the equipment is connected to the mains, the CHARGER led [4] remains
lighted.
STEP 2.- Power on and signal connection
1.
Hold the rotary selector [1] pressed until the equipment is powered on.
2.
Connect the RF signal source in the input connector [9].
03/2008
Figure 1.- Battery charging.
RF SOURCE
Figure 2.- Power on and signal connection.
Page 13