Promax PRODIG-3 Manual Del Usaurio página 98

It activates the Preferences menu (long pulsation):
Language
Beep
Skin
Light Sensor
Ter. Identify
Min. Ter. Power
Min. Ter. Level
Min. Sat. Power
C/N
Identify Timeout
Sat Band
Auto Power Off
Time Power Off
Units
Rotary Selector
Page 22
Selects the language between DEUTSCH, ENGLISH,
ESPAÑOL, FRANÇAIS,
РУССКИЙ and PORTUGUÊS.
Activates (ON) / deactivates (OFF) the beeper.
Sets the screen background colour.
It activates a light sensor to automatically adjust the
display contrast and brightness. Options are: High
contrast (with low luminosity), Low contrast (with high
luminosity) and AUTO.
Selects the type of terrestrial digital signal, DVB-T used
by AUTO-ID and EXPLORER functions.
Minimum level of digital signal to display. (Between
0.0 dBµV and 130.0 dBµV).
Minimum level of analogue signal to display. (Between
0.0 dBµV and 130.0 dBµV).
Minimum level of digital signal to display.
Defines the C/N measuring method between Auto or
Reference Noise (Manual), used to determine the
frequency where noise level will be measured in the
spectrum analyser mode.
Sets the maximum time that the equipment will carry
out the identification of a channel unknown before
going to the next one.
(Only satellite band).
Selects the C-band or Ku-band for tuning satellite
signals.
Activates the automatic power off mode.
Select the power off timeout between 1 and 120
minutes.
Select the measurements units: dBµV, dBmV or dBm.
Select the movement sense: CW (clockwise) or CCW
(counterclockwise).
USER'S MANUAL. PRODIG-3
ITALIANO, CATALÀ,
03/2008