Promax PRODIG-3 Manual Del Usaurio página 129

USER'S MANUAL. PRODIG-3
If the transmission is not codified on the lower right corner a (FREE) indication is
showed or otherwise states (COD). Also the standard MPEG-2 profile is indicated which
determines the compression rate for the digital service decodified, the level of image
resolution (4:3), the resolution (rows x columns) for received video and the picture
refreshment frequency rate. In the (OSD:OFF) mode the information window previously
described will appear whenever the rotary selector is pressed again [1].
CHANNEL:
CCIR
FR:
NOTE:
The symbol
instrument has detected a saturation condition for analogue signals in the
currently channel tuned. This symbol also appears, when the colour
subcarrier signal (Burst) does not contain information and therefore the
images are shown in black and white.
When a digital channel is decodified, once the Table of Services SDT (Service
Description Table) acquisition is completed, is possible to accede to the list of
services contained in the Table.
For it place the field selector, by means of the vertical cursors
field of the active service (e.g. Veo TV in the following figure) and later press the rotary
selector [1].
The DIGITAL SERVICES menu will appear then with the services available in the
digital Multiplex. Move the vertical cursors
press it to select the service to visualise on screen.
03/2008
S10
168.25 MHz
Figure 33.- Analogue channel monitoring.
in the upper corner of the screen indicates that the
50 Hz
PAL BG
[6] or turn the rotary selector [1] and
[6], on the
Page 53