Tv Operating Mode - Promax PRODIG-3 Manual Del Usaurio

When monitoring a digital signal spectrum also appears two additional markers in
white colour, which indicate the bandwidth of the digital channel (See previous Figure).
5.16

TV Operating Mode

When pressing the
accedes to the TV mode, and tries to demodules on the monitor the currently tuned
video signal.
In the monitor will appear the TV picture with a window on the lower part to show,
for five seconds, in the case that the signal is analogue, the channel number, the
frequency, the active canalization, the colour system and the TV standard.
If the signal is digital it shows, for about five seconds, the following parameters:
channel number, frequency, active channel plan, type of DVB signal, service name,
service identifier (SID), network name, network identifier (NID), video program identifier
(VPID), audio program identifier (APID), video bit rate (VIDEO), audio bit rate (AUDIO)
and type of coding (MPEG-1, MPEG-2 or AC-3).
When pressing the cursor arrow
window again, in order to fix on screen this window the vertical cursors
be pressed up to select the OSD:OFF field, so press rotary selector [1] to switch to
OSD:ON.
Page 52
[2] key from any mode of operation the PRODIG-3
OSD: ON
CHANNEL: 66
CCIR
834.00 MHz
DVB-T
VISTA TV
NETW.: VistaNetw
VIDEO: 3999 kbit/s
AUDIO: 192 kbit/s
Figure 32.- Digital channel monitoring.
USER'S MANUAL. PRODIG-3
DTV
(FREE)
VPID: 101
APID: 103
MP@ML
720x576i
4:3 50 Hz
Component
SID:
NID: 12289
MPEG-2
- -
MPEG-1 L-2
[6] will appear the tuning information
100
[6] must
03/2008