Before The First Use; How To Use; Steam Ironing - Di4 Vapore Stiro 3000 Manual De Usuario

BEFORE THE FIRST USE

Before using the steam iron, please ensure you read the user manual and understand all parts and
features of the Steam Station. Be sure to remove any packaging material and labels before using for
the first time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on
clothes and there may be traces of dirt on the soleplate

HOW TO USE

Always check whether a label with ironing instructions is attached to an article to be ironed. Follow
these instructions in all cases.
Turn the temperature control dial round to set the appropriate temperature indicated in ironing ins-
tructions or in fabric label.
Marking
• (1 dot)
•• (2 dots)
••• (3 dots)
Insert the main plug into the wall socket. The indicator light will turn on.
When the indicator light goes out you may start ironing.
WATER TANK FILLING
Unplug the iron before filling the water tank.
Open the cover for filling.
Slowly pour water through the water inlet.
Do not fill higher than mark on the water tank, in order to avoid spilling out of water.
NOTE: Your steam iron is designed to use tap water, however, if the water is very hard, it is advisable
to use distilled water.
The water tank should be emptied after each use.
SPRAYING
As long as there is enough water in the water tank, you may use the spray button at any temperature
setting during steam or dry ironing.
Press the spray button several times to activate the pump while you are ironing.

STEAM IRONING

Set the temperature control dial to the desired position in accordance with the manufacturer's label.
Set the variable steam control to the desired position.
CAUTION: Avoid coming in contact with ejected steam.
Material, for example
Acetate, elastane, polyamida, polypropylene
Cupro, polyester, silk, triacetate, viscose, wool
Cotton, linen
17