Before The First Use - Di4 Jet Pressing Facile Manual Del Usuario

BEFORE THE FIRST USE

Before using the Steam Station, please ensure you read the user manual and understand all parts and features of
the Steam Station. Be sure to remove any packaging material and labels before using for the first time.
In the first use they can break off odors or fumes that sent quickly. Do not spray for the first time on clothes and
there may be traces of dirt on the soleplate
WATER TO BE USED
The device is designed for use with tap water. If the water in your area is hard or semi-hard use mix tap water
with distilled or demineralized water purchased in stores, in the ratio 2:1 and 1:1 respectively (distilled water: tap
water). Check with your water supplier to determine the type of water in your area. Never use 100% distilled or
demineralized, rain water, softened water, scented water, water from other appliances such as refrigerators, air
conditioners, dryers or other types of home water preparation water.
FILLING THE WATER TANK
Fill the water tank through the water inlet cover. Do NOT fill over the MAX level indicator.
OPERATING INSTRUCTIONS
Place the Steam Station on a firm level table, bench or ironing board.
Plug the unit into a power outlet and switch on at the power point.
Adjust the temperature dial in terms of choose the kind of fabrics that you want to iron.
Note: If you want to use the steam ironing, we suggest you to adjust the temperature dial on MAX.
When the iron operating light indicator goes out the device will be ready for use.
Note: During the whole operating time, the iron operating light indicator will go on and off in erratic intervals, this
is normal.
To make the steam jet come out, select the steam position with the steam selector and press the steam trigger, and
if you want to stop the steam release the steam trigger, in a few seconds steam will stop.
IRONING TIPS
• Start with the fabrics to be ironed at a low temperature and finish with those that need higher temperatures.
• For mixed fibre fabric, set the ironing temperature to a lower setting.
• For woollen garments, press the steam trigger repeatedly over the garment without physically touching it with
the iron.
• For thicker fabrics, raise the steam output by turning the steam control to steam function and iron temperature
at MAX position.
• For low temperature setting on the dial, select steam selector to no steam.
VERTICAL STEAM IRONING
This feature allows you to smooth out creases in garments or drapery in a similar manner to a garment steamer.
The high steam pressure of the Steam Station can provide bursts of steam while holding the iron vertically. For
best results, utilise on delicate or light fabrics. To produce the maximum amount of steam, set the steam setting
with steam selector. Only direct steam at hanging garments in a safe area and ensure you always refer to garment
manufacturer recommendations.
WARNING: Do NOT direct the steam onto a garment that is being worn or at any person.
17